Jump to content

Recommended Posts

Posted

Hello !

 

I joined 16+ hours ago and I'm experiencing issues with Johnny FTP server; as it hangs at the "Retrieving directory listing" stage before it times out. I retried as of now (thought it was a temporary glitch), but it's still not working !!

 

Any thought, help will be much appreciated. Thanks!

 

-elhambre

 

Posted

What settings are you using for the FTP connection?

 

Hi!

 

I'm using Filezilla client following the configuration suggested by cPanel; ie  explicit FTP over TLS. In fact, I tested all of them. Only plain FTP is the working config, but that's not an option for me.

 

-elhambre

Posted

We don't support FTP over TLS. You need either SFTP (SSH-secured FTP, not to be confused with FTPS, which is another name for the unsupported FTP over TLS), or plain unencrypted FTP.

 

The recommended settings are SFTP using these settings:

 

Host: johnny.heliohost.org

Port: 1373

Username: (your cpanel username)

Password: (your cpanel password).

 

If you use the "additional" FTP accounts that you create in cPanel, they support plain unencrypted FTP only. Those accounts need to use port 21 with no encryption, and you need to specify the entire username shown (usually in the form ftpaccount@mydomain.heliohost.org like an email address would be).

  • Like 1
Posted

We don't support FTP over TLS. You need either SFTP (SSH-secured FTP, not to be confused with FTPS, which is another name for the unsupported FTP over TLS), or plain unencrypted FTP.

 

The recommended settings are SFTP using these settings:

 

Host: johnny.heliohost.org

Port: 1373

Username: (your cpanel username)

Password: (your cpanel password).

 

If you use the "additional" FTP accounts that you create in cPanel, they support plain unencrypted FTP only. Those accounts need to use port 21 with no encryption, and you need to specify the entire username shown (usually in the form ftpaccount@mydomain.heliohost.org like an email address would be).

 

Now, that's very informative. Thanks!..

 

But, what about the keys?.. Should I copy/paste the ones on cPanel? or generate new ones from Let's Encrypt ? or is it up to me? and When using SFTP, do we still need the password ?

 

-elhambre

Posted

You shouldn't need an SSH key to use SFTP. We have username and password authentication enabled, so you just supply your cPanel username and password. The system will automatically use our Let's Encrypt certificate for the keys (you'll be prompted to verify the certificate the first time you connect if I remember right).

Posted

Indeed. But my attempts failed....

Status:	Connecting to johnny.heliohost.org:1373...
Response:	fzSftp started, protocol_version=8
Command:	open "elhambre@johnny.heliohost.org" 1373
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Waiting to retry...
Status:	Connecting to johnny.heliohost.org:1373...
Response:	fzSftp started, protocol_version=8
Command:	open "elhambre@johnny.heliohost.org" 1373
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Disconnected from server
Status:	Connecting to johnny.heliohost.org:1373...
Response:	fzSftp started, protocol_version=8
Command:	open "elhambre@johnny.heliohost.org" 1373
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server
Status:	Waiting to retry...
Status:	Connecting to johnny.heliohost.org:1373...
Response:	fzSftp started, protocol_version=8
Command:	open "elhambre@johnny.heliohost.org" 1373
Error:	Connection timed out after 20 seconds of inactivity
Error:	Could not connect to server

Any thoughts ?

Posted

In verbose mode:

Status:	Connecting to johnny.heliohost.org:1373...
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpDeleteOpData::Send() in state 0
Trace:	Going to execute /usr/bin/fzsftp
Response:	fzSftp started, protocol_version=8
Trace:	CSftpDeleteOpData::ParseResponse() in state 0
Trace:	CControlSocket::SendNextCommand()
Trace:	CSftpDeleteOpData::Send() in state 3
Command:	open "elhambre@johnny.heliohost.org" 1373
Trace:	Connecting to 65.19.141.67 port 1373
Trace:	We claim version: SSH-2.0-FileZilla_3.40.0
Error:	Connection timed out after 20 seconds of inactivity
Trace:	CControlSocket::ResetOperation(2114)
Trace:	CSftpDeleteOpData::Reset(2114) in state 3
Error:	Could not connect to server
Status:	Waiting to retry...
Error:	Connection attempt interrupted by user
Posted

Are you on a shared network of some form (employer, university, public WiFi, etc.)? Many of those block port 1373, so the connection won't work from those locations.

 

If that's the case, you'll have to use unencrypted ftp on port 21.

Posted

Are you on a shared network of some form (employer, university, public WiFi, etc.)? Many of those block port 1373, so the connection won't work from those locations.

 

If that's the case, you'll have to use unencrypted ftp on port 21.

 

Not really!.. I'm using your typical home user setup: NAT router + ISP. But, it's the first time connecting to an FTP server gave me this much trouble. I did indeed suspect my firewall and/or my router. But the troubleshooting I did, showed that it's not on my end, presuming of course that your server is a OK.

 

Anyway, thanks for your time. I will use limited FTP accounts and change their password at the end of every session.

 

-elhambre

Posted

It's weird because it's working fine for me. I'll have our one of our other admins look at this, perhaps he has some other ideas.

Posted

The SFTP username is going to be the same as your cpanel username, so elhambre, not elhambre@johnny.heliohost.org.

Posted

The SFTP username is going to be the same as your cpanel username, so elhambre, not elhambre@johnny.heliohost.org.

 

The username I used  was indeed "elhambre", so that's not the issue. I was thinking, when I refereed to a possible server-side issue, to a problem in my entry within the OpenSSH config file, assuming that's what you're using...

 

Besides my failed attempts with FileZilla, I also tried this test with the sftp command, both directly (via my ISP) and via a VPN (to somewhat ruleout port 1373 filtering.)

export SSHPASS=myUserPwd

sshpass -e sftp -oPort=1373 elhambre@johnny.heliohost.org:$HOME_DIR/public_html/myFile.xyz

The response output in both cases was the usual:

ssh: connect to host johnny.heliohost.org port 1373: Connection timed out
Connection closed

Thanks for any other suggestion/test/etc...

 

-elhambre

Posted

Try

sftp -oPort=1373 elhambre@65.19.141.67
That's what I use and it works from multiple locations.

 

 

Got this:

sftp -oPort=1373 elhambre@65.19.141.67
ssh: connect to host 65.19.141.67 port 1373: Connection timed out
Connection closed
Connection closed.  

It's interesting to compare that output with this one, when trying to connect on port 22:

sftp -oPort=22 elhambre@65.19.141.67
ssh: connect to host 65.19.141.67 port 22: Connection refused
Connection closed

The above tells me that port 1373 is blocked somewhere downstream in the Internet "pipes" thus, the first request never made it to your server, while when using the standard port 22 it reaches its target in a fraction of a second and gets rejected as expected.

 

What's so special about port 1373?

https://www.speedguide.net/port.php?port=1373

 

Anyway, I won't bother you with this any longer. I'll try your service on Johnny for awhile, then may be I'll move to your more "stable" systems if there is room for my tiny WebApps.

 

Thanks guys!

 

-elhambre.

Guest
This topic is now closed to further replies.
×
×
  • Create New...